One ZPU-4 anti-aircraft gun in 12mm or 1:144 scale.
Files for PLA and Resin printing included
This gun comes in 5 parts. Take care removing the support material. The gun barrel parts should be glued together first. Once glued together the gun barrels can be fitted into the body of the gun (note the correct orientation in the pictures). Finally the upper part of the gun body should be glued in place to completely enclose the gun barrel parts. It is recommended to glue the gun body onto the carriage as the spigot is quite short.
This product is covered by the Butlers Digital Models PRINT GUARANTEE
Our models are designed to be printed.
The models are optimised for either PLA or resin printing. Where necessary a different model is provided for PLA and resin printing.
Resin models are designed to reduce the amount of resin required to print them. Vehicles are often hollowed out to reduce resin use.
The model is split into the minimum number of parts necessary. Tanks are usually only two parts, a hull and a turret. This makes the models stronger and easier and faster to print.
We provide models with and without support so you can print the models how you want.
Model features and support are adjusted for scale so that the models looks good, are robust and will print well at all scales from 1:285 to 1:48 scale.
Pictures shown are for 28mm PLA models
DIGITAL DOWNLOAD
This product is a digital download only.
After purchase of the files go to the downloads section of your account to download the .zip file.
