One Boeing CH-47 Chinook, in 28mm or 1:56 scale.
Files for PLA and Resin printing included
2 different variants are available, American or British. The British version has some small additional features.
Some assembly is required. The wheels, rotors and engines need to be glued onto the two parts of the model.
The rotors may be held in place by 5mm diameter, 1 mm thick magnets (not supplied), or alternatively glued into position. The plastic inserts provided should be used if magnets are not used.
The Chinook is designed to be mounted on one of our flight stands. The mounting hole goes deep within the fuselage so that a magnet is not required. Due to the deep mounting hole, the taller flight stand is recommended.
The flight stand is not supplied with this model but is available separately.
This product is covered by the Butlers Digital Models PRINT GUARANTEE
Our models are designed to be printed.
The models are optimised for either PLA or resin printing. Where necessary a different model is provided for PLA and resin printing.
Resin models are designed to reduce the amount of resin required to print them. Vehicles are often hollowed out to reduce resin use.
The model is split into the minimum number of parts necessary. Tanks are usually only two parts, a hull and a turret. This makes the models stronger and easier and faster to print.
We provide models with and without support so you can print the models how you want.
Model features and support are adjusted for scale so that the models looks good, are robust and will print well at all scales from 1:285 to 1:48 scale.
Pictures shown are for 15mm PLA models
DIGITAL DOWNLOAD
This product is a digital download only.
After purchase of the files go to the downloads section of your account to download the .zip file.
